Dynatech MP-7000 Servisní příručka Strana 65

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 92
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 64
Removing the EtCO2 and NIBP Modules
9650-0801-01 Rev. A ZOLL Propaq MD Service Manual 61
9 Remove five (5) screws and washers from
the NIBP unit to release it.
Note: During reassembly, torque screws to
6 in-lbs.
10 Remove multi-wire EtCO
2
cable with
ferrite.
11 Disconnect the brown SpO
2
flex cable as
shown.
12 Disconnect the NIBP tubing from the side
panel in the area illustrated.
13 Remove the NIBP module from the unit.
Zobrazit stránku 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 91 92

Komentáře k této Příručce

Žádné komentáře